Malaysian Food Canners Association (MFCA) to legislative and regulatory agencies as well as common industry positions in Malaysia

Established in 1972, the Malaysian Food Canners Association (MFCA) or “Persatuan Pengetin Makanan Malaysia” is the trade association for Malaysian food canneries.

It was set up to develop the success, wealth and cost-effectiveness of the industry. We do this by promoting cans and communicating their benefits to our customers, consumers, media and trade analysts.

To meet the industry’s needs, MFCA actively participates in the exchange of ideas as well as influencing legislative,
regulatory and administrative policies of interest to food canneries.

MFCA is not affiliated or connected with any association and/or societies established outside Malaysia.

Our mission statement
MFCA serves as the voice of the food canning industry. We provide a forum for members to:

  • Advocate common industry positions to legislative and regulatory agencies whose activities impact the canned food market
  • Address issues of common concern
  • Protect and grow the market by promoting the cost-effectiveness and benefits of cans

Our goals

  1. To safeguard the interests of the Association whilst maintaining the rights of members, as well as assisting and supporting them.
  2. To deal with issues affecting the production and marketing of our members’ products.
  3. To provide a platform for discussion, and address abuses in the trade, laying down codes of guidance to members.
  4. To establish a fund to be used for the proper implementation of the Association’s objectives, and for other purposes such as the protection of its members’ interests.
  5. To collect and share statistics and other information with members, and for that purpose, to print, publish and provide any periodicals or marketing materials that the Association considers beneficial to members and for the promotion of the industry.
  6. To enter into reciprocal arrangements with other associations, companies or individuals in matters relating to the industry.
  7. To engage in activities which may be considered conducive to the extension of the trade or business of canning, and allied trades and businesses.
  8. To cooperate with the government on the sound development of the industry in Malaysia.
How can we differentiate between steel and aluminium cans?
Steel is the only metal which is magnetic, so if a magnet is able to stick to it, the material is steel.
Why are cans called tins?
This reference comes from the very thin layer of tin (about 15 millionths of an inch thick – less than a human hair) applied to prevent rusting and help keep the contents in the cans fresh and safe, even for corrosive food such as acidic fruits.
Are there other types of cans besides steel and aluminium?
There is also Tin Free Steel (TFS), which is produced by applying electrolytic chromic acid treatment over steel sheets. TFS is commonly used for making beverage cans. It is highly heat-resistant, causing neither discoloration nor deterioration in material properties. It also has excellent resistance to black sulfide stain, making it the most suitable material for making fish cans.
Why are cans the preferred form of food packaging?
Cans are lightweight and volume-efficient. They stack well for storage and transportation, and are rigid and unbreakable, as well as tamper-proof. They are friendlier to the environment as they are 100% recyclable. Cans also maintain the freshness of their contents longer than any other form of packaging.
How many types of cans are in production?
There are more than 600 sizes and styles of cans being manufactured today. They include 2-piece aluminium beverage cans, round composite cans, round sanitary open top, aerosol, drawn tins, friction plug style (paint), key opening, screw top, plastic top (cone tops and other configurations), slip cover, oblong cans (easy opening, edible oil type, hinged cover, household machine oil, key opening, spice type, solvent style) and square cans.
Steel cans are said to be 100% recyclable. What does this mean?
Every bit of a steel can can be recycled and used as material in the steel-making process. It can be remade into a new can or something else (e.g. construction material, vehicles).
Which is the most valuable container in the recycling bin?
Aluminium cans. Aluminium is the only packaging material that covers its cost of collection and re-processing.
How should cans be prepared for recycling?
They should be rinsed clean and dried. For steel cans, place the lids inside the cans and recycle the entire can.
What is the difference between closed-loop recycling and open-loop recycling?
Closed-loop recycling is recycling at its best – a product is remanufactured back into the same product – and the process can be repeated endlessly. Open-loop recycling is where a product is recycled and made into something else, like steel cans into steel pipes.
How is recycling aluminium cans beneficial?
Each aluminium can recycled saves enough electricity to power a TV for 3 hours, or a 100-watt light bulb for 4 hours. Recycling aluminium cans instead of producing them from virgin ore also saves energy by 95%.
Why use recycled material?
Every ton (1,016kg) of steel recycled saves this much of natural resources that would otherwise be used to make new steel: 2,500 pounds (1,133kg) of iron ore, 1,400 pounds (635kg) of coal and 120 pounds (54kg) of limestone.
How many varieties of food are available in cans?
More than 1,500. Canned food is superior to food in other forms of packaging as they retain as much or more nutrients compared to even fresh food.
Canned food can last up to two years. Are the contents inside safe? Do they react to the materials used to make cans?
Most of the food and beverage metal containers are coated with Bisphenol A (BPA) based epoxy resins to protect the food from a direct contact with the cans. Bisphenol A -Not Intentionally Added [ BPANI ] lacquers which do not contain BPA have been developed and their application in the industry has been studied and implemented on various range of products. The implementation is done gradually as risk assessments must be conducted for each type of lacquer system / product / manufacturing process, and this can take years to complete. The BPANI lacquers are still not as universal in their application as the epoxy lacquers were, and this is the main challenge faced by the Industry.
Is it true that cans are getting lighter?
Yes. There are 34.21 aluminium beverage cans to a pound (0.45kg) now compared 21.75 cans in 2006. The first 2-piece aluminium cans weighed 3 ounces (85g). Now they weigh less than one-half ounce (43g).
Which was the first canned soft drink?
Cliquot Club ginger ale, which debuted in 1938. The can was the cone top type produced by the Continental Can Company.
How about the first canned beer?
Kreuger Beer, made by the American Can Company. It was first sold in 1935 in Richmond, Virginia. It came in a flat or punch top steel can that required a can opener.
When did vending machines start serving canned soft drinks?
1961. By the late 1960s, canned soft drinks dominated the vending market over bottle and paper cup machines.

Can and the food industry

Nearly 200 billion cans of food are produced in the world each year. When the can was first used as the solution to preserving food for an army at war, it not only supported industrialisation, but also fuelled the globalisation of food.

The can industry is always adapting and innovating, while preserving its core qualities – protection and strength. It has evolved from the early crude tinplate canisters shaped by hand to the lightweight, completely recyclable containers produced mechanically today.

What’s more, the can allows us to enjoy food from faraway places, and even from a different time. Exotic food and out-of-season produce is now within reach of almost everyone. Canning has made the products we want cheaper, safer and more accessible.

With superb food preserving qualities (without the use of preservatives), canning provides nutritious food that requires no refrigeration or other special storage, and minimal cooking time. Steel cans are also cost-effective while the food inside has a longer shelf life.

History of canned foodBefore canning there were limited ways to keep food from spoiling: drying, salting, smoking and pickling. These methods are not only time-consuming; they also affect the form, taste and nutrients of the food.

The onset of a war in Europe in the late 18th century was the catalyst to a new form of food preservation. Soldiers needed to be fed and armies and navies were looking for a cheap and effective way to keep food from spoiling on the battlefield and long voyages. So French emperor Napoleon Bonaparte offered a prize to anyone who could come up with a new way to preserve food.

A confectioner named Nicolas Appert, who had earlier discovered that heating food to high temperatures inside sealed glass jars stopped it from spoiling, won the prize in 1810.

He perfected the technique with iron canisters, which are lighter and sturdier for transportation and storage. The iron was coated with a fine layer of tin to stop it from rusting.

The first cans were expensive, because they were made by hand. A good tinsmith could only make six to ten a day. The food inside took up to six hours to cook. All these made canned food very expensive for ordinary people. They were used mainly by the army and navy until the 1920s.

Gradually, the production of cans became mechanised. The first automated production lines produced around six cans an hour. Today’s modern production lines can produce around 1,500 cans a minute.

Cans now weigh over 30% less than 20 years ago, take fewer raw materials to produce, but are stronger and safer. They come in all different shapes and sizes, even with ring pull or peel foil that does away with the need for a can opener. Bowl-shaped cans that are microwaveable make food preparation easier than ever.

Timeline of Canned Food Industry

1795
The Government of Napoleon offered 12,000 francs for a solution to preserving food for its army and navy.

1809
Nicolas Appert was awarded the prize of 12,000 francs from the French government for his method of preserving food by sterilization in cans. He is recognised as the father of canning.

1810
Peter Durand received a patent from King George III of England for a tin-plated iron can as a food container.

1812
Nicolas Appert’s “Book for All Households: Or the Art of Preserving Animal and Vegetable Substances for Many Years” was translated and published in New York.

1818
Peter Durand introduced the tin-plated can in America.

1819
Thomas Kensett, Sr. and Ezra Daggett of England canned oysters, fruits, meats and vegetables in New York City.

1825
Kensett patented the tinplated can in America.

1847
Allen Taylor, an American, patented a machine-stamped tin can with extension edges.

1849
Henry Evans was granted a patent for the pendulum press. When combined with a die device, it could make a can end in a single operation. This increased individual worker production from five or six cans per hour to 50 or 60 per hour.

1856
Gail Borden was granted a patent for condensed milk.

1866
The first can opener was invented.

1875
Arthur A. Libby and William J. Wilson developed the tapered can for corned beef in Chicago.

1876
The Hume “floater” was introduced to “float” solder onto the ends of cans as they rolled along “the line.”

1877
The simplified “side seamer” for cans was introduced.

1880 – 1890
The first automatic can making machinery greatly increased production.

1898
George W. Cobb Preserving Company perfected the sanitary can.

1914
Continuous ovens for drying inked tinplate were introduced.

1921
Zinc oxide and other zinc compounds in an enamel lining were found to prevent discoloration of canned corn by “corn black” or zinc sulphide.

1922
Eric Rotheim of Oslo, Norway developed the modern aerosol can.

1940
The start of carbonated soft drink canning.

1941
U.S. soldiers were supplied with canned field rations during World War II.

1955
Canned food was put through the A-Bomb Civil Defence Tests in Nevada. They proved safe to eat.

1957
Aluminium was used to make cans.

1960
The easy-opening can was introduced.

1964The 2-piece can was developed. It used less metal than the traditional 3-piece can.

 

Nematodes in canned fish

Following the recent media buzz relating to the occasional finding of nematodes in canned fish, the MFCA would like to provide the following clarification to the public.

Marine nematodes of the genus Anisakis are the most common parasites found in fish and seafood. They can be found in marine and fresh water fish, as well as in cephalopods (squid, octopus, cuttlefish). The life cycle of the Anisakis involves several hosts, from crustaceans to fish and marine mammals, through the marine food chain. This is a natural occurrence and they have always been found in fish and seafood.

The parasites Anisakis are not classified as a health risk for the fish canning industry by the world food authorities, because these nematodes are easily killed by freezing the fish core at a temperature of -20°C for 24 hours or by heating the fish at a temperature of 60°C for 1 minute.

Further information can be found on the FAO (Food and Agriculture Organization United Nations) website: http://www.fao.org/docrep/006/y4743e/y4743e0c.htm

Canned fish in Malaysia are prepared with frozen fish and are also subject to strong heat treatments. The canned fish products are thermally processed (sterilization process, which consists of heating the finished product to more than 100°C for more than an hour) to achieve commercial sterility, which is more than adequate to ensure the inactivation of parasites, along with other heat resistant bacteria. The canned fish products are safe for consumption.

The incidental presence of Anisakis in canned products does not present any health hazard, but MFCA’s members acknowledge that proper presentation and consumers’ perception of the finished products are of utmost importance. Therefore, MFCA’s members have implemented due diligence processes at their factories to remove the nematodes from frozen fish before the canning process. Our Malaysian factories are committed to consistently producing safe and high quality canned fish products.

With the above explanation, MFCA’s members would like to assure the public that they have taken the utmost care to ensure the safety and quality of the products.

MFCA’s members strive to continuously improve Malaysian manufacturing practices in order to maintain the highest standards and to meet the expectations of their loyal customers and of future generations.